Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear quarter chop

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 8
Joined: Tue Jul 18, 2006 7:56 am

rear quarter chop

Post by toymad80 »

rear quarter chop on gq shorty,any one got close up pictures on where to cut,also lookin for ideas/designs on tube rear bars.
GQ shorty 3in sus 2in body lift 33 muddies comp truck in the makin
Top
Posts: 325
Joined: Sun May 08, 2005 4:55 pm
Location: melbourne

Post by mudmav »

search is your freind there have been about 10 or 15 post on this in the last 6 months with some good up close photos and explanations there is actually a thread on gq rear bars to. :P
andrewholmes
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

And unless the pics that he was asking for have been hosted on a site like photo bucket he has bugger all chance of seeing em as the site lost all its piccys after mentioned date ... :roll:




dude I will have alook through my piccys of my old shorty and see if I still have em saved somewhere ...and either host em up or email ....

i will also post some pics of the rear bar i made aswell ...


cheers


Dan
[b][i] DAN [/i] [/b]


:silly:
Top
User avatar
Vulcanised
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

i'm curious too :cool: am cutting mine shortly..... getting a rear bar off 80slgq
There is no "I" in Team, but there are 5 in Individual Brilliance
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

i have a few photos but photobucket is down at the moment...

check out my for sale thread and second photo down you can see the line i cut my quarters on..

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=80875

main thing to do is when you cut the driver side take out your tailights and the inner panel and make sure that you know where all the wires are so you dont slice them when you chop it...rest of it is pretty straight forward..cut 5-10mm below where you want the finished line to be and fold the bottom lip up...

i just sikaflexed a panel in underneath but you can either rivet or weld in ..whatever you prefer...(sikaflex is heaps easier but)

dave
www.bolsys.com.au

the original and the best
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests