RS9000 shock lenth fully extended and tough dog 6" shoc

[Mousie]

hey just wondering dose any 1 know the measurements of the 2 shocks fully extended

i have seen both at difrent times and they look to be the same leng but
jsut wondering if someone knows the size...

and what is the longest length shock i could put in a patroll without moving any mounts on a 6-7" sping lift ? if any 1 knows


cheers

[CanberraMav]

It depends on what size the shocks are.
RS9000 is the model number.
They are all different lengths


You need to measure the open length while at full flex. No one can tell you what you need as it depends on the brand of spring and the spring rate etc.

[JOHNZ]

hey just wondering dose any 1 know the measurements of the 2 shocks fully extended

i have seen both at difrent times and they look to be the same leng but
jsut wondering if someone knows the size...

and what is the longest length shock i could put in a patroll without moving any mounts on a 6-7" sping lift ? if any 1 knows


cheers

Normally you would match the lenght of shocks to the springs.

BUT in general terms 6" front would be about 620mm rear 800mm.
cheers Johnz

[Mousie]

ah so you could get a rs9000 to suit a lift to whatever size ?


herm how on to moving mounts?......

obviously the higher you go with a mount the longer shock you can run and then you have to bolt in your springs so they dont pop out rite?..

i think i would need to also extend all the arms on the rear diff or go A frame to suport this so there is no binding going on..

[Tiny]

ah so you could get a rs9000 to suit a lift to whatever size ?


herm how on to moving mounts?......

obviously the higher you go with a mount the longer shock you can run and then you have to bolt in your springs so they dont pop out rite?..

i think i would need to also extend all the arms on the rear diff or go A frame to suport this so there is no binding going on..

what is wrong with how it is currently set up? what do you want to achieve?

[CanberraMav]

There isnt much wrong with the current setup in the GQ for the rear.

I would just measure up as suggested then chuck em in. Dont bother moving the shock mounts as your springs will fall out before your shocks max out if you get shocks that are big enough

[Mousie]

the strive for more articulation.....



i dont care about springs i can bolt them in or get ones that are 7-8" soft and let them sag down a little back to 6" maby 5"

so i get better articulation..
i may be on the compleatly rong track here tho