Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 upgrade to 3ltr?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 37
Joined: Tue Jan 17, 2006 9:11 pm

2.8 upgrade to 3ltr?

Post by Richride »

Hi guys
Have noticed lately that the price has dropped down for the Surf 3 ltr motor from import wreckers.
My question is does this motor bolt into early Hilux's fitted with the 3L and use the same engine mounts/bellhousing? and if so can it be made into a non electronic motor?
Also can the 5L engine be used as well as a bolt straight into the same.
Just looking for other options to replace the 3L
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

Also very interested in this.. :lol:
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

afaik the main difference between the 3L and the 5L motors is the engine mounts. provided you use a 5L not the 5L-e then it should be just a matter of new mounts. i can't remeber if you need the bellhousing of it as well.

for the 3 litre turbos its a major. you will need the donor motor complete with ECU etc
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

the G52 gearbox wont handle the power output of the 3.0 turbo- thats why they fitted teh R-151 gearbox from factory.

Ive been all over my old mans prado TD with a measuring tape.... im thinking of seeing if i can pick up a halfcut prado TD and dropping the engine and gearbox into my 2.8D since after 300,000kms, my engines getting a bit tired!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 19
Joined: Mon Apr 24, 2006 10:24 pm
Location: central coast

Post by it works »

Im fitting a 1kz(2001 3.0l turbo) to a 93 hylux right now, i have done a few now they are a lot of work they take 5 day to fit including moving the engine mounts and wiring up the ecu. every thing is different,length shape mounts radiator crossmember exhaust tail shafts ect. i have also put a 5l injector pump on a 1kz and it worked had to make the throttle links up as well so i dont see why you cant put a 5l pump on a surf 3.0l engine.
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Post by sniper »

Bitch of a job putting in a 3lt TD into a 3L car.

The 3L has bugger all elcectrics where as the 5L-e has a sensor on everything. The 3tlr will shit all over the 2.8 in power but its a big job to swap them over.

Would not just put a stock 3ltr in as they are no quicker then a 2.8.

You will need a donor car for the swap, as you will have to swap from the dash forward.
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

EARLY 3.0TD's were a lot easier, as they didnt have the fly by wire, you could just hide the puta in the dash, hook up the throttle cable and about a dozen connectors and they worked.

When toyota went to Fly by wire on their 1KZ-TE, things got a LOT harder, which means if you want the prado TD- intercooler gives you 96kw/343nm, then you need to either turn your 3L into a fly by wire, or work out how to make a cable operated TPS from an early turbo lux fit your prado motor :S
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 37
Joined: Tue Jan 17, 2006 9:11 pm

Post by Richride »

What is the big difference between 3L and the 5L, can a 5L be fitted and then turbo'd?
Can I use my original pump and other acc, exhaust?, Surf 2.4 turbo manifold or 1KZ turbo manifold fit the 5L?
Just trying to find out what would work best
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

motor swap

Post by LuxyBoy »

Just turbo the 3L and run it until it dies.
Then do the 5L swap and you have a turbo already to go on the 5L :D

Only thing i don't like about the 5L is the electronics, the 3L can basically be a submarine if you have a snorkel and there is jack all that can be damaged. The 5L has no more power than a 3L, i know two 3Ls that used to beat a 5L before they rolled :cry:
Kind Regards,
Brad
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

3L motor - 60kw

5L motor - 70kw

the was a 5L, and a 5L-E

The 5L is just as good a submarine as the 3L was....

Tho ive been looking at pranged D4D hilux's at the auction sites! :D
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 153
Joined: Tue Apr 20, 2004 8:56 am
Location: Sydney

oefn

Post by Luv to 4B »

Doen the 3L to 1KZ-TE swap, had it in and running in a day and a half and people off this board will verify that fact. Although i had the 2000 model 1KZ-TE which is much easier to do than the later fly by wire models. Would recommend the conversion though...cheap and easy...good increase in power and make the lux usefull.
My mind is like a steel trap....quite dangerous because i forget where i left it.
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

what did you pay for the engine itself?
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

So I just wanted to get this clear. A 5L can be fitted into a 3L car easily? ie. same bellhousing, and everything will boltup without any dramas. Only thing needed to change is you'll need to use is 5L engine mounts? Does the airbox plumbing, manifold etc all line up the same? Alternator, a/c compressor, steering pump? A 5L motor is only $300 more than a 3L that's pretty cheap to an extra 10kw or +10% power.
Posts: 104
Joined: Tue Feb 28, 2006 12:02 pm

Post by millers1 »

This will also depend on wether your lux has ifs or solid axle front end if you have solid front end you will need to change the sump over as you wont have the clearance if you have ifs front end.In other words if yours is already ifs no problem if solid you will need to take the sump off the old 2.8 3L and put onto the 5L also will need to change exhaust manifold over either way. You will not be that impressed with the 5L as said above, I have passed 5L before pulling up hawksbury and mooney brige here in Sydney heading up north on the F3. Myn is not turbo. If I was you I would turbo what you have and as said above keep going untill it dies, I have seen the old 2.8 do 400/500 with a turbo and no problems providing you dont over boost a safe boost would be 8 pound and will not give you any problems what so ever. Regards Steve M
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

yeah that 400-500k life on the 3L was what I was told too. Mine's shit itself at 270k. There's no guarantee specially if the previous tightarse lazy ferret owner only changes the oil every 10000 kms. Anyway will probably get it reco'd now as it seems the best value for money.
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests