Hi,
I have bought a '91 Sierra for a bargain, but it needs a new clutch (which I knew before I bought it). How much should I expect to pay for it fitted? How much if I do it myself? Is it a very difficult job?
I have one quote of $600 - fitted, flywheel machined and oil top-up... is that reasonable?
Any help is appreciated
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Clutch Price
Clutch Price
Use cheap tools... Its better to break the tool than the part!
Clutch
Hey, I just put a new clutch in my jimny, for a full button clutch kit including spigot and machining it cost $460 but didn't included fitting. A heavy duty clutch was over $100 cheaper. They said it would cost $160 to fit it. As I was over 1500km's from home and a tight arse I decided to fit it in the car park were I was staying with the tool kit i carry in the car (it's pretty basic) It took about 2-3 hours. The box must weigh about 25kg's so it's easy to pull out and put back in by hand (Also pretty easy to drop on you face). Just have to make sure you car is high enough to comftably lie on your back underneath it. The clutch plate I lined up by eye, I think it was a little out but it still went straight in with minimal wriggling. If you do fit it your self go to a clutch and brake company and ask for trade prices. I'm yet to be asked were I work and it will save you a heap 
.
Hope this helps someone. Jimmys
. Hope this helps someone. Jimmys
clutch prices
well i just did a clutch , stock standed you need to find out how many teeth on gear box shaft , 18 or 20
18 tooth, std clutch is 185
20 was 243 for the heavy duty of it. I put this one in came with bearing, and instructions, we lined it up by eye, and had a prob as it was 1 mm out so re did it and it slide in great.
bj
18 tooth, std clutch is 185
20 was 243 for the heavy duty of it. I put this one in came with bearing, and instructions, we lined it up by eye, and had a prob as it was 1 mm out so re did it and it slide in great.
bj
clutch
I have an exedy hd which cost about $185 took 1/2 hour to change in the driveway, where do you live ??? it only did 1000km and blew the motor so I have a clutch ther for$50 just need thrust race. pm I'm in campbelltown.
Who is online
Users browsing this forum: No registered users and 4 guests