Hey. Just a quick note for Jimny owners, the other day I had a look at a mates Jimny as it had trouble idling and had no power. He is also a mechanic (lazy mechanic) he checked every thing you might immediatly check about 6 months ago but every thing was fine. As I had have a Jimny myself I was a little intriged by the problem so I pulled the timing belt cover off to find that the timing belt pulley 'keyway' on the front of the crank was flogged out giving it about 25 degrees of slop. It has done less than 100K and is only now due for a belt. It might be worth for anyone doing a belt change in the future just checking that there timing belt pulley is secure as he is now looking at a new crank shaft. Don't think this is a common problem but it obviously happens! Ohh and a new crank alone is $1060 RRP.
Jimmys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Faulty G13BB
Who is online
Users browsing this forum: No registered users and 76 guests