Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15x8 on 91 Hilux legal???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

15x8 on 91 Hilux legal???

Post by Zam »

Hi Guys,

Am looking at getting 15x8 rims on my 91 Dual Cab Lux and was wondering this is roadworthy/legal.

I rang insurance and they said as long as the hilux is roadworthy according to vicroads this is fine, however, I rang vicroads and they were stuff all help and would not commit to any direct answers and suggested I try ringing Toyota. So I rang toyota and they said they didnt know as they only keep information for the newer models and suggested I try a tyre dealer.

I am going to be running 31's which is one of the most common sizes tyre run, reason I am going 15x8 is because I want black sunnies which I have been told dont come in 15x7 in correct offset.

Any help is appreciated.

Cheers


Zam
It's hard to soar like an eagle when you are surrounded by geese.
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Post by Gribble »

Buy white 15x7s and spray them black?

Other than that, speak to an engineer, he will be able tell you based on the Vic-Roads rules or ADR's whether it is legal or not.

Vic-Roads and the RTA in NSW are useless for getting unformation out of. At least you know that now.
;)
\m/
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Get the Tech outta here!
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

Yeah Sorry guys thought I was posting in the General Tech section, if this can be moved there would be great.


Cheers
It's hard to soar like an eagle when you are surrounded by geese.
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

i doubt you'd be pinged for it unless the tyres stick out heaps and scrub
on 31s, nobody will notice... but you're probably better off running 7s anyway

i have a feeling resprayed white 15x7s will be cheaper than black 15x8
and also you'll be less likely to lose a bead
Posts: 135
Joined: Wed Jul 13, 2005 6:44 pm
Location: Central Coast NSW

31's

Post by Sneddo »

you will have no probs with 31's as under the new rules they are only 2" bigger than the standard 29's..... but in saying that you are "ment" to get it engineered and in doing so he will just make note of the rim size on the papers.
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

I have moved it to Tech.

RN
Posts: 104
Joined: Tue Feb 28, 2006 12:02 pm

Post by millers1 »

dont know if your fully insured or not but if your with the racv they will not insure it with 8's on it as they will be too wide, even 3rd party insurance against hitting some one else could be a problem if it arises (hope it doesnt) as far as you putting them on then some thing happens eg run up the arse of a bmw and they might refuse to pay up leaving you in the shit. Regards steve M
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

Hey Millers1,

Not sure if you are 100% on that one, I am insured with RACV and gave them a call and 4 people I spoke to said that as long as it was roadworthy according to Vicroads then it was OK by them, apparently the rules have changed about 12 - 18mths ago.

It used to be that you could only increase by 1" on standard, but seeing as now that so many people are putting on aftermarkets wheels on their cars and 4by they have changed there regs to bring it into line with Vicraods.

The problem I am having is trying to get a straight answer out of Vicroads, one guy their told me to call a tyre dealer and they would be able to tell me what is legal???

Any ways thanks guys, I am sure alot you who have fitted bigger wheels /tyres have gone through the same thing.


Cheers


Zam
It's hard to soar like an eagle when you are surrounded by geese.
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Vic roads web site has all the info. Basically you can go 1" over widest standard rim.
Read your glove box sticker or manual and it will give widest rim fitted standard. If its 6" then 7" is OK.
If 7" then 8" is OK BUT track cant be increased by more than I think 25mm so reversed type rims are out.
You will also need to ensure if they go in as well that they dont hit on steering arm etc.

Something like that

Bazzle
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Zam wrote:Not sure if you are 100% on that one, I am insured with RACV and gave them a call and 4 people I spoke to said that as long as it was roadworthy according to Vicroads then it was OK by them, apparently the rules have changed about 12 - 18mths ago.
ask for it in writing. When you get to court, adn say "4 people on the phone told me..."... who are they going to believe?
Post Reply

Who is online

Users browsing this forum: No registered users and 61 guests