Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need about a square metre of steel... I want to replace this floor in my project G60:
I am planning on making a frame for it with angle steel, and then making a floor that lifts out. There are also cross members underneath that would support it.
So what would be the right steel sheet/plate to get? I am not mad keen on chequer plate, as I think it is a bit overused,. Can I get something with a similar level of corrugation? Or would the right thckness of flat steel be strong enough?
And how much will it cost roughly, cut in a rectangle to my measurements?
ive been buying from SS for a few years. not the cheapest on some things but they are happy to deal with the public and they have a very fast turn around time for pickup. also their off cuts bin sometimes has some good steel in there. a trailer fab shop should be able to do bead rolling for you.
Well, despite appearances it's not as swiss-cheesey as it looks in those photos, now that I've had a chance to clean it up a bit. So I am thinking of repairing it rather than replacing it after all.
Dunno yet, still working on the chassis and mechanicals and will look more closely at the body soon.
Not so 'used' but oh sooo much more bling 
