Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LT95 high range ratios

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

LT95 high range ratios

Post by swamp »

This may go well in tech
LT95 4spd transfer high range ratios and tooth counts
High range ratio 1.174 - 47 teeth
High range ratio 1.113 - 48 teeth
High range ratio 1.1227 - 43 teeth
High range ratio 0.99621 - 45 teeth

The tooth counts are on the large plain gear that is fitted to the
intermediate shaft.
out of my mind, back soon.
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

Were the LT95's fitted to V8 110's/stage 1's geared at 1.34? -any idea what the counts were on these?
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Post by Maggot4x4 »

Is it only 4th gear that is different?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Maggot4x4 wrote:Is it only 4th gear that is different?
No, this gear is the high range gear in the T-case, so affects ALL gears in high range. Low range stays the same.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests