Outer Limits 4x4 Board

Posted: **Tue Aug 15, 2006 8:43 pm**

This may go well in tech
LT95 4spd transfer high range ratios and tooth counts
High range ratio 1.174 - 47 teeth
High range ratio 1.113 - 48 teeth
High range ratio 1.1227 - 43 teeth
High range ratio 0.99621 - 45 teeth

The tooth counts are on the large plain gear that is fitted to the
intermediate shaft.

Posted: **Tue Aug 15, 2006 9:29 pm**

Were the LT95's fitted to V8 110's/stage 1's geared at 1.34? -any idea what the counts were on these?

Posted: **Tue Aug 15, 2006 9:54 pm**

Is it only 4th gear that is different?

Posted: **Wed Aug 16, 2006 12:58 am**

Maggot4x4 wrote:Is it only 4th gear that is different?

No, this gear is the high range gear in the T-case, so affects ALL gears in high range. Low range stays the same.

Outer Limits 4x4 Board

LT95 high range ratios

LT95 high range ratios