Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diff housing swap

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

diff housing swap

Post by rockcrawler31 »

I noticed that the Michelles sacs troopy has 80 series diffs for increased track width and stronger CV's

aside from the spring perches how hard is this conversion? and how much do you gain?

which model diffs are the best to get or avoid, and are 60series as good?

Are there any other benefits?

what sort of money should i pay for a set of housings and any idea if anyone would be interested in 75series housings?

cheers all
MILO
http://www.populationparty.org.au/
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday
Id be looking at putting coils underneath if you go 80 housings.....heard 80 chassis's can be retrod under a 75...but then you have to ask...whats an 80 worth these days....compared to your 75
Andrew
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

chassis swap, oh man that'll be a biiiiig job :D

as for coils, i like it but i'd be starting again with the suspension setup.
http://www.populationparty.org.au/
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

rockcrawler31 wrote:chassis swap, oh man that'll be a biiiiig job :D

as for coils, i like it but i'd be starting again with the suspension setup.
You could leave the 70 chassis there...something to weld to :@)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest