I have recently been contacted by someone who has a problem with a leaking ZD 30 intercooler. This isn't an uncommon occurence as I have heard similar stories from various forums.
As I'm a specialist Tig Welder and have done some intercooler work in the past I suggested to him that we should both try to get hold of an old ZD 30 I/cooler that has been replaced due to the same problems he has experienced. If we can get hold of one I could get a custom I/cooler core made up by PWR or Adrad and then use the standard endtanks off the ZD 30 intercooler and solve his problems.
If anyone has an old ZD 30 I/cooler sitting in their shed they may like to sell it would help me get this guys Patrol running smoothly again.
Regards Andrew.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ZD 30 intercooler
ZD 30 intercooler
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Who is online
Users browsing this forum: No registered users and 2 guests