Im after somewhere that sells the tie rod bush that enables me to drill a hole, then press in the taper bush and hey presto, its all done. I know there around and there perfectly legal.
Prefer in syd, but ill order from anywhere.
ALmost have my high steer sorted
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Looking for a tie rod taper bush
Moderators: toaddog, TWISTY, V8Patrol, Moderators
taper
get an engineering joint to machine a couple up will cost about $20 i would recon. 
Lockers or Knockers ,both will make for fun.
HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers
www.trailtrack4x4.com
HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers
www.trailtrack4x4.com
Nah for a Nissan, May pay to do the ring around. May be able to make a toyota Tie rod work thoughspazbot wrote:give sam at overkill a call if it for a yota he had a special reamer made to cut the taper
Not keen on seeing an engineering mob for a one off, they certainly know how to charge.
Im just trying to keep the costs down
Cheers
Who is online
Users browsing this forum: No registered users and 3 guests