Page 1 of 1
Looking for a tie rod taper bush
Posted: Tue Aug 29, 2006 9:25 pm
by pongo
Im after somewhere that sells the tie rod bush that enables me to drill a hole, then press in the taper bush and hey presto, its all done. I know there around and there perfectly legal.
Prefer in syd, but ill order from anywhere.
ALmost have my high steer sorted
Cheers
taper
Posted: Tue Aug 29, 2006 10:14 pm
by Webbie
get an engineering joint to machine a couple up will cost about $20 i would recon.
Posted: Wed Aug 30, 2006 11:09 pm
by spazbot
give sam at overkill a call if it for a yota he had a special reamer made to cut the taper
Re: taper
Posted: Thu Aug 31, 2006 2:15 pm
by Ice
Webbie wrote:get an engineering joint to machine a couple up will cost about $20 i would recon.
lol take the setup time into account and maybe more like $150
Posted: Thu Aug 31, 2006 2:23 pm
by pongo
spazbot wrote:give sam at overkill a call if it for a yota he had a special reamer made to cut the taper
Nah for a Nissan, May pay to do the ring around. May be able to make a toyota Tie rod work though
Not keen on seeing an engineering mob for a one off, they certainly know how to charge.
Im just trying to keep the costs down
Cheers