Placed 2 adjustable panhard rods on my swb gq about 18 months ago (3rd's) Noticed lately that rear tyre is creeping out the guards a little on the left hand side, Q? How to adjust back to centre? & Is this something that should be a re-currence?
Thankyou..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Adjusting Adjustable Panhard
If the suspension has dropped the wheels will sit back over to the left.
Undo the locking nut(s), remove one end of the rod from the car, screw the rod in to shorten it a little bit, refit to car, drive down road and back, measure distance from tyre to chassis on both sides, if unequal readjust until correct. Dont forget to retighten the locking nut.
Job done, very easy.
Undo the locking nut(s), remove one end of the rod from the car, screw the rod in to shorten it a little bit, refit to car, drive down road and back, measure distance from tyre to chassis on both sides, if unequal readjust until correct. Dont forget to retighten the locking nut.
Job done, very easy.
The hardest thing about owning a jeep is telling your parents you're g a y!!
Who is online
Users browsing this forum: No registered users and 1 guest