Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Biltiens, where to buy

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Biltiens, where to buy

Post by 6.5 rangie »

Okay , i need to change my shocks (bistiens) over as they are to short. What i need to know is where to buy Bilstiens to suit 80 Series for the front and GQ's for the rear. Preferably somewhere in the Dandenong region.
Also need to do the Brakelines aswell, where is the best spot for these? (dandy again would be good)
oh and bumpstop is front around 125mm
Rear 170mm.

And wil probably be selling my bilstiens if anyone is keen, they are 243's and 253's
Damien


--------------------------------------------------------
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

Andrew Richmond does extra long travel bilsteins. I am not sure if he is able to or does change the valving to make them stiffer, which is one of the reasons for going 80/gq.
Unfortunately Andrew is in Thomastown, but I am sure he can organise something through a courier.
Warn - Dont leave home without it
Top
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Post by defender kev »

For brake lines Allied Brake and Clutch in Cranbourne,he will make them on the spot any length you like and were about $40 each when i did my rangie and 110

Allied Brake and Clutch
228 High st Cranbourne
Ph 5996 5655
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
Top
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

TRobbo wrote:Andrew Richmond does extra long travel bilsteins. I am not sure if he is able to or does change the valving to make them stiffer, which is one of the reasons for going 80/gq.
Unfortunately Andrew is in Thomastown, but I am sure he can organise something through a courier.
I've got some of Andrews Long travel Bilsteins here, unused to suit Disco1 and RR classic. Bought for a job that never eventuated. I'll sell you them for $880.00 a set and u pay freight.

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

For brake lines Allied Brake and Clutch in Cranbourne,he will make them on the spot any length you like and were about $40 each when i did my rangie and 110
I got mine done at Better Brakes in Moorabin for $25 each, 100mm longer :)
They also resleeved my master cylinder with a stainless sleeve and put a kit through it for around $100, bargain
Last edited by 6.5 rangie on Tue Sep 12, 2006 7:01 pm, edited 1 time in total.
Damien


--------------------------------------------------------
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Andrew Richmond does extra long travel bilsteins.
Yeah checked them out but at well over $500 a pair, forget it.
Just going to go for cheapies for now
Damien


--------------------------------------------------------
Top
POD
Posts: 5
Joined: Fri May 05, 2006 12:00 pm
Location: Drouin, Vic

Post by POD »

Quadrant Suspensions in Intrepid Drive, Berwick are the people to talk to about Bilsteins. I think they are the Vic distributor. 97699666
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest