Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gas air filter boxes

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

gas air filter boxes

Post by shakes »

have people made custom boxes to sit on top of the carb or is there something out there than I can adapt to gas and butcher to suit?


done a bit of a search and couldnt come up with anything conclusive.

when it comes to making one... is it possible to make it too big/high etc and effect the performance or have i just gotta make sure I get a nice swirl effect around the filter

(its a 350holley on a rover/p76 motor)

Cheers
Simon
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

what type of gas mixer are you using ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

Impco 300a
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

You can get a standard old fashioned looking air cleaner, but in black plastic for the 300A. I'll take a pic tomorrow in the light and post it. It comes with an adaptor from the rounded rectangle outlet to a 3" hole which is common and therefor allows you to easily plumb it to a snorkle.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

BowTieGQ wrote:You can get a standard old fashioned looking air cleaner, but in black plastic for the 300A. I'll take a pic tomorrow in the light and post it. It comes with an adaptor from the rounded rectangle outlet to a 3" hole which is common and therefor allows you to easily plumb it to a snorkle.
As used on carby gq's but you will need a bit of space under the bonnet to clear as it will sit quite high ontop of a holley/ quaddie or whatever you are using.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

cheers!

got a body lift in her so engine bay height isnt a problem
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests