Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tray Ideas...

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

Contact:
Contact Toyo Truck

Tray Ideas...

Post by Toyo Truck »

Hey guys,

Just got a roll bar for my flatbed single-cab hilux.
I am looking at making a canopy with the roll-bar integrated
into it as the front section.
I want to be able to sleep in mine if needs be, and thats about it.
Should I just get another matching rollbar for the rear?
Has anyone got pics of this type of setup for ideas??

So I am thinking of taking about 50mm off the sides (width wise)
and about 60-70mm off the back too.

I got these pics off www.twistedaxle.com "Camo's Toy"...
anyone got any other similar ones?

Cheers,
Bart
The Lux is back. New and Improved v2.0!
Top
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

Contact:
Contact Toyo Truck

Post by Toyo Truck »

And what is the best thing to cut an alloy tray with?
An angle grinder or what?

Cheers,
Bart
The Lux is back. New and Improved v2.0!
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

from what i belive and have done: Grinderscan cut alloy, but ive been told they dont like it as the grinding wheels clog up.

other than that i am unsure.
Last edited by ozy1 on Tue Oct 21, 2003 2:38 pm, edited 1 time in total.
Top
Posts: 1326
Joined: Thu Mar 13, 2003 2:26 pm
Location: North Sydney, Australia

Contact:
Contact Toyo Truck

Post by Toyo Truck »

Cheers Ozy,

I just spoke to him,
My mate reckons use a circular saw with a fine blade in it works
a treat. He just cut down his tray about a week ago.

Anyone else tried this? I do not want to FARK my tray up!

Cheers,
Bart
The Lux is back. New and Improved v2.0!
Top
Posts: 37
Joined: Wed Oct 15, 2003 2:53 pm
Location: Sydney

Post by manitou »

Have not used it on a tray but most fine blades for the cirular saw can also cut aluminium or non ferous metals and have cut aluminium with out problem you just have to be carefull as it can grab easier than normal.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

use a jigsaw if you are scared :finger:
Top
Posts: 352
Joined: Mon Dec 23, 2002 9:10 pm
Location: Sydney

Post by 65Mog »

Toyo Truck wrote:Cheers Ozy,

I just spoke to him,
My mate reckons use a circular saw with a fine blade in it works
a treat. He just cut down his tray about a week ago.

Anyone else tried this? I do not want to FARK my tray up!

Cheers,
Bart


It will cut it OK just take it easy, I had to laugh when i seen this post years ago we were away shooting and the old bloke that owned the property we were on had to cut about a foot of an old aluminium truck tray he had , but all he had to do it with was a chainsaw! it was quite a site, the homelite got a workout that day.
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

you can buy aluminium cutting wheels to fit grinders. The guy at the local aluminium welding place uses them all the time. They look more like a small circular saw blade than a normal metal grinding or cutting disc. Try your local industrial supplier.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest