Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help with gaskets

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 791
Joined: Fri Mar 17, 2006 7:45 pm
Location: Gold Coast QLD

Help with gaskets

Post by NCpaj »

well ive taken off my sump given it a good cleanout. and am bout to put it back together.

ive got a gasket and gasket goo.

which side of the gasket do i put the bead of goo?
upper(block) or lower(sump) or both? i cant remeber

thx
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

i put goo on the sump itself laid the gasket ontop, then a tad bit more on the block just to be sure i got a good seal all way around
1995 land rover disco on 265 muddies
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

make sure you put the silcon into the corners were the cranks comes down in to the sump if this is on you model or were the crank bearing caps sit on the sump
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests