Outer Limits 4x4 Board

well ive taken off my sump given it a good cleanout. and am bout to put it back together.

ive got a gasket and gasket goo.

which side of the gasket do i put the bead of goo?
upper(block) or lower(sump) or both? i cant remeber

thx

i put goo on the sump itself laid the gasket ontop, then a tad bit more on the block just to be sure i got a good seal all way around

make sure you put the silcon into the corners were the cranks comes down in to the sump if this is on you model or were the crank bearing caps sit on the sump