Outer Limits 4x4 Board

Anyone got pics of a modified gearbox mount to accomodate a big lift on a GQ? mine is very close, and i'm told you need to take the gearbox crossmember off and chop a bit out of the part that is too close to the drive shaft. I am putting a front shaft with a cardin in it in a couple of weeks, i want to modify the crossmember while i have my mug under the car.

i just finnished a 6in lift in my shorty and the front shaft rubbed at ride height. i took it out and chopped and welded it back together. can take pics tomorrow if you like, its too dark now.

PAUL

i've posted them before, but just for you, i'll post them again.

that last one shows me exactly what i wanted to know Thanks a heap!!

i'm told with the rear one, it's just a matter of reversing the tail shaft.... which is what i'll do before i put the cardin in it

i got a 6" lift and the only time mine rear shaft touches is when i've got the shocks off and the car hanging from a crane. yes it is reversed.

heat it up crossmember and belt it with a hammer. rear shaft you can just swap around end for end.

This should be put in the bible