Page 1 of 1

Pajero io Revving at 100kmp

Posted: Thu Sep 21, 2006 1:53 pm
by amshaw
Hi,
We have a Pajero io, 2000my with the 5-speed, great little car but one thing really gets up my nose. :bad-words:

When cruising at 100km it sits at about 3,400-3,600rpm. :shock: Im always looking for another gear when in top. :roll: :?

Is there anyway of remapping the ecu or another way of cutting down the rev's a little?

Or is there another box I can put in ....like a 6 speed ???? :roll:

Posted: Thu Sep 21, 2006 3:03 pm
by NCpaj
you could run different diff ratios but that would effect all your other gears aswell.

you could also try sitting on 90.it saves a bit of juice to

are you running bigger than stock tyres? cause if you are you might be doing 110-115kmph.

my nc petrol does 3000rpm at 100kmph

paj

Posted: Thu Sep 21, 2006 4:20 pm
by klrevo
yeh my paj does about 3000km at 100km/hr,

i rekon thats high

dean ;)

Posted: Thu Sep 21, 2006 4:26 pm
by j-top paj
u should see my paj with the 5.29s, that revs a bit high

paj

Posted: Thu Sep 21, 2006 6:27 pm
by klrevo
j-top paj wrote:u should see my paj with the 5.29s, that revs a bit high
hahah yeh i bet thats lower again :shock:

mines doing yeh about 3000rpms sitting at 100km/h, but thats on the speedo, so yeh its more like about 106km/h.

hence i usually sit about 95km/h on my speedo which turns out to be about 100.7km/h doing about 2800rpms. and yeh i consider that high, dont want 5.29s :lol:

dean ;)

Posted: Fri Sep 22, 2006 12:08 am
by j-top paj
cant remember exactly what mine does at 100kmh but i know at 140kmh its doing 4000rpm.

Re: paj

Posted: Fri Sep 22, 2006 12:10 am
by j-top paj
klrevo wrote:dont want 5.29s
sure u dont want FACTORY 5.29s. FACTORY 35mm body lift, FACTORY 32s, FACTORY 9.5 inch diff and FACTORY rear locker :finger: :armsup: :D

Posted: Fri Sep 22, 2006 6:08 pm
by Locknut
my NH auto with 31"tyres sits on about 115 at 3,000 rpm