Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pajero io Revving at 100kmp

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 142
Joined: Mon Apr 24, 2006 6:33 am
Location: Hamilton Vic

Pajero io Revving at 100kmp

Post by amshaw »

Hi,
We have a Pajero io, 2000my with the 5-speed, great little car but one thing really gets up my nose. :bad-words:

When cruising at 100km it sits at about 3,400-3,600rpm. :shock: Im always looking for another gear when in top. :roll: :?

Is there anyway of remapping the ecu or another way of cutting down the rev's a little?

Or is there another box I can put in ....like a 6 speed ???? :roll:
Andrew

'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab

"Put The Wet Stuff On The Red Stuff"
Posts: 791
Joined: Fri Mar 17, 2006 7:45 pm
Location: Gold Coast QLD

Post by NCpaj »

you could run different diff ratios but that would effect all your other gears aswell.

you could also try sitting on 90.it saves a bit of juice to

are you running bigger than stock tyres? cause if you are you might be doing 110-115kmph.

my nc petrol does 3000rpm at 100kmph
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

paj

Post by klrevo »

yeh my paj does about 3000km at 100km/hr,

i rekon thats high

dean ;)
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

u should see my paj with the 5.29s, that revs a bit high
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

paj

Post by klrevo »

j-top paj wrote:u should see my paj with the 5.29s, that revs a bit high
hahah yeh i bet thats lower again :shock:

mines doing yeh about 3000rpms sitting at 100km/h, but thats on the speedo, so yeh its more like about 106km/h.

hence i usually sit about 95km/h on my speedo which turns out to be about 100.7km/h doing about 2800rpms. and yeh i consider that high, dont want 5.29s :lol:

dean ;)
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

cant remember exactly what mine does at 100kmh but i know at 140kmh its doing 4000rpm.
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Re: paj

Post by j-top paj »

klrevo wrote:dont want 5.29s
sure u dont want FACTORY 5.29s. FACTORY 35mm body lift, FACTORY 32s, FACTORY 9.5 inch diff and FACTORY rear locker :finger: :armsup: :D
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

Post by Locknut »

my NH auto with 31"tyres sits on about 115 at 3,000 rpm
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests