Hi all,
I'm having a problem in that my 1997 NL Pajero is jumping out of low range 4WD. I have an Auto transmission and occasionally when climbing steep, rocky terrain the 4WD selector lever will jump back to the "neutral" position between 4Llc and 4Hlc... I know the Auto transfer case doesn't strictly have a neutral position but thats the best way to descibe it.
I've tried searching this forum and some of the other ones as well as consulting my mechanic but can't find any refeence to this so I assume it's a rare problem.
Some suggestions have been... transfer lever fouling the body, worn engine/gearbox mounts or weakened/poor detent springs inside the box.
I've checked the first two, but short of droipping the case out I can't follow up the detent springs.
Does anybody have any suggestions before I plunge into doing that?
Cheers,
Peter.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Jumping out of Low Range 4WD
Moderator: -Scott-
Jumping out of Low Range 4WD
Peter
1997 LWB NL Pajero
Standard... for now
1997 LWB NL Pajero
Standard... for now
nah havnt managed to fix it, i just bought a patrol and it fixed the problem
nah seriously but, i found that if i applied a little bit of pressure to the lever it would hold itself in gear
nah seriously but, i found that if i applied a little bit of pressure to the lever it would hold itself in gear
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Who is online
Users browsing this forum: No registered users and 1 guest