Ok currently repairing my sills from dents etc and in doing so pulling out handfulls of damp mud from inside the sills (and the last time i used it was months ago) and there is a fair bit of rust around.
What do you think of putting that spray expanding foam stuff inside the sill once completed through a small hole.
This would then fill up the whole space and not allow any water/mud to enter the sills, and may also provide more strength/rigidity to the sill having a 'solid' center.
Any thoughts? Anyone tried it?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Expanding Foam into sills?
Most types of expanding foam are hydrophillic by nature. They absorb water and this will soon ruin the bond with the metal, leading to further rust.
If you are interested in making this work for you, you will need to steer clear of the "foam in a can" type products and look towards a closed cell urethane foam as used by boat builders for in-hull floatation.
These do not absorb water, nor do they allow water to penetrate between the foam cells.
Talk to your local boat supplies merchant or urethane supplier. You can purchase the type of foam you need in a 2pac liquid form, ready to be mixed and applied.
If you are interested in making this work for you, you will need to steer clear of the "foam in a can" type products and look towards a closed cell urethane foam as used by boat builders for in-hull floatation.
These do not absorb water, nor do they allow water to penetrate between the foam cells.
Talk to your local boat supplies merchant or urethane supplier. You can purchase the type of foam you need in a 2pac liquid form, ready to be mixed and applied.
If you want to prevent it rusting you could spray it with fish oil in there. I haven't used it myself, but have heard good things about using fish oil in sills and bottoms of doors etc.
Obviously not going to strengthen it though.
Ben
Obviously not going to strengthen it though.
Ben
WWW.ZUKPARTS.COM - Quality Suzuki Off-road Parts - 1600 Adaptor kits - Vitara Power Steering adaptor kits - Disc brake kits - Heavy Duty Transfer case arms & more
don't do it my last car had it on the left hand side and repairing of anything on that side was hell......not to mention that side had more rust than the right side......
thoroughly clean the car and allow to dry.......spray with fish oil and I mean heaps of fish oil and cover this with cavity wax to seal the seams covered in fish oil........allow about 3 weeks for the smell to die down...
James
thoroughly clean the car and allow to dry.......spray with fish oil and I mean heaps of fish oil and cover this with cavity wax to seal the seams covered in fish oil........allow about 3 weeks for the smell to die down...
James
Plus somejtraf wrote:allow about 3 weeks for the smell to die down...
But I reckon it _does_ work. I've done it on two cars and haven't had any rust issues despite going down to stockton semi-regularly. Pull the seats and flooring out while you're going, I caught a heap of rust under the sound deadener paint in my zook whilst doing it - treated it with rust converter, painted it (no bog, you can't see what's going on under it - just like that expanding foam stuff) and it hasn't come back since, despite it having been bad enough to create holes in my floor... I'd only just gotten it, too
. I've sprayed fish oil all over the place and i reckon that's helped stop it from coming back.You can get scented (or de-scented...?) fish oil that doesn't smell as bad from supacheap I think...
Nick
i once used that expanding foam to fill in and re-shape a rear quarter on an Escort P/van. It was rubbed back to bare metal before the foam was sprayed in and it never rusted in that spot again.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
...because there was no metal visiblebuilt4thrashing wrote:i once used that expanding foam to fill in and re-shape a rear quarter on an Escort P/van. It was rubbed back to bare metal before the foam was sprayed in and it never rusted in that spot again.
On a serious note - did you basically use that stuff as bog?... cause i've seen somone fill a hole (a dent) in with bog; a few years later the bog caused rust as the moisture was trapped between it and the metal, and the bog lifted itself out. I personally don't fill any holes, I'd just rather soak 'em with fish oil (or any similar product) cause otherwise you can't see the rust until it's too late...
Who is online
Users browsing this forum: No registered users and 3 guests