Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Question for the Zook rebuilders

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Question for the Zook rebuilders

Post by nicbeer »

Hey,

Doing the rebuild soon and want to get some ideas on the best way to conduct this.

I have a WT with the chassis basically bare, body is separate and mostly complete. Locker is already setup in the rear and front is ready. suspension is basically done except for shock mounts upper as i need to flex it to get lengths and positions.

Would the best approach to assemble the chassis complete as possible inc 1.6 + adapter kit,gearbox,diffs + shafts and transfer case. fuel and water system installed. hook up steering box to chassis and diffs only.

then drop the body on top after, install BL and work from there for steering link to box and brakes and any other bits from there.

Sounds ok?

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 1142
Joined: Fri Feb 18, 2005 6:25 pm
Location: brisbane

Re: Question for the Zook rebuilders

Post by largesuzy »

nicbeer wrote:Hey,

Doing the rebuild soon and want to get some ideas on the best way to conduct this.

I have a WT with the chassis basically bare, body is separate and mostly complete. Locker is already setup in the rear and front is ready. suspension is basically done except for shock mounts upper as i need to flex it to get lengths and positions.

Would the best approach to assemble the chassis complete as possible inc 1.6 + adapter kit,gearbox,diffs + shafts and transfer case. fuel and water system installed. hook up steering box to chassis and diffs only.

then drop the body on top after, install BL and work from there for steering link to box and brakes and any other bits from there.

Sounds ok?

Nic
yeah that sounds about right, get it to a rolling chassis then put the motor etc in then place the cab on top
89 lux 2bl 4inch spring 35's etc still slow as a snail
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Anyone else done a rebuild?

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

done way too many......need phsyciatric help!
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

depending on size but you might have to work body and suspension with the tire size too.
Its a wheelbase thing
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

done way too many......need phsyciatric help!
Any info then not just a useless comment?
depending on size but you might have to work body and suspension with the tire size too.
Only going 31's as i have got them under a NT already. doing a 2" BL and work out any necessary spring rates and shocks later when togetther with most of the weight on there.

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests