Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hub seals

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 108
Joined: Tue Sep 13, 2005 10:19 am
Location: Brisbane, QLD

Hub seals

Post by CheesePony »

Heya,

Just after some part no's if anyone can help....

I've just been to Repco to pick up some hub seals and axle seals (the inner seal for the oil) and he's given me 4 hub seals. I've got a LN106R 92' solid axle hilux.

Does anyone know the part no's for these seals?

The seal no's he gave me are: 97699 & 97165 and they are 'Kelpro' but they both look like hub seals. I'm guessing at least one of these seal numbers are correct. Which one? And does anyone have a part number for the axle seal?

And also...

My ute is white, does anyone know where to pick up some touch-up paint from and what the colour code im looking for is?

Thanks heaps guys
It's not the speed that kills you... it's the sudden stop.
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

I bought a complete swivel hub rebuild kit last week on eBay for $80. Came with all seals and gaskets to do both sides, plus upper and lower bearings. All looks like good stuff too!

Sorry, don't know part numbers though.
Lovin the FZJ105-T, bling by Ryano
Top
Posts: 108
Joined: Tue Sep 13, 2005 10:19 am
Location: Brisbane, QLD

Post by CheesePony »

Yeah I just relised you could buy the whole swivel kit.

Silly me :oops:

Does anyone know the paint code tho?
It's not the speed that kills you... it's the sudden stop.
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

paint code will be on the compiance plate under the bonet if u got 4 2 off them are probly the seasl that go on the roator and the other 2 are smaller and go on the diff housing iner axle
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

The axle (oil) seal is about 30mm diametre, the hub seal is about 100mm diamaetre.

Im pretty sure the hilux uses same hub and axle seals as the 40/60/75series cruiser.


I have got no part codes on me, but i have been told by a few people that the genuine oil seals are better and last longer than aftermarket ones. something to do with a dual lip on them rather than 1 lip.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 74 guests