G'day,
I have recently purchased a GV Airflow snorkel and will be trying to fit it to my 97 Vitara, has anybody done this before out there please ? If so, what drama did you go through ?
Thanks
Dick
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Airflow Snorkel - GV to old Vit fit up
Airflow Snorkel - GV to old Vit fit up
05 Patrol GU ST Ute
3" lift, 3" exhaust, custom Garrett BB Turbo and top mount.. and electric mirrors !
3" lift, 3" exhaust, custom Garrett BB Turbo and top mount.. and electric mirrors !
I cant give you exact details on fitting to a Vitara, but I can give some general advice, I have fitted a Airflow to my old Sierra I didnt get the old carboard template and I dont know if they come with one.
If you have a carboard template get it onto the guard and mark it up best you can.
Try use a small drill bit to cut the circle out required for the snorkel to go through. drill closely to each other all the way round. File it out nicely and hit it with some Kill rust protectant paint so the guard doesnt rust. The front guard isnt to hard to remove just a few bolts and you will be able to see where it all goes.
If you have a carboard template get it onto the guard and mark it up best you can.
Try use a small drill bit to cut the circle out required for the snorkel to go through. drill closely to each other all the way round. File it out nicely and hit it with some Kill rust protectant paint so the guard doesnt rust. The front guard isnt to hard to remove just a few bolts and you will be able to see where it all goes.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Re: Airflow Snorkel - GV to old Vit fit up
the 97 one is a wide body one isn't it??Dick wrote:G'day,
I have recently purchased a GV Airflow snorkel and will be trying to fit it to my 97 Vitara, has anybody done this before out there please ? If so, what drama did you go through ?
Thanks
Dick
I have the cardboard template for a safari snorkel if that helps?
'07 ML Triton
12 tonne excavator for hire:0421 076 548
12 tonne excavator for hire:0421 076 548
Who is online
Users browsing this forum: No registered users and 2 guests