Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ60 vacuum hoses - Help required

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1
Joined: Mon Oct 09, 2006 1:43 pm
Location: Perth WA

FJ60 vacuum hoses - Help required

Post by RedFJ »

I've been told that the carbie vacuum hoses on my '81 FJ60 (2F) are incorrectly routed, but none of my four workshop manuals show the hose connections end-to-end.

Does anyone have a mudmap of where the hoese actually hook up?
There are 5:
Dizzy
Inlet manifold (front)
Inlet manifold (back - hanging off some big screw-in finned thingo)
2 vacuum advance "pots" on the carbie.

Any help would be greatly appreciated.
Thanks
Top
Posts: 199
Joined: Thu May 04, 2006 5:18 pm

Post by vorno_18 »

as long as they are all below the butterfly on the carb they are all the same thing.

whatever needs manifold vaccuum just hook them up in any order it wont matter
60 series cruiser, GU patrol
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 20 guests