Bundera Suspension Q's

[Bazooka]

Hi All,

I usually hang around in the Suzuki section but now have a few Toyota related questions. I have a Suzuki Sierra but before you all boo me and turn back the page I have just purchased a rolling Bundera. With this I plan on putting the running gear under my zook. Now I know the Bundera is not known for its great suspension but I do want to convert to coils hence the purchase. I would like to know if there is anything to look for and address on the Bundy's suspension as I do the swap? Can I get a bit more out of it if I modify it a little as it is installed. How does the Bundy like to be modified in this respect? Is it safe to install it in standard config with a few tweaks or should I toss out the standard setup and make new arms etc. Just like to know peoples opinions on what is available and what can be done within reason to get this to flex better.

Cheers

[toysuzi]

g,day bazooka

PM sent

cheers daryl

[badger]

have a look into the dobbin x links
otherwise 5 link or a frame the rear using gq, 80 or rover arms

what year bundy is it. the later ones had front arms like an 80 the earlier ones are like a gq's ....................... the later model ones flex better but obviously the suspension mounts are different

[Bazooka]

Thanks for the input guys.
I will have a look at something more aftermarket for the setup and see what I like.
Its an 85 model that had a 22R engine in it.