Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will a l200 diesel transfer fit a 2.6petrol paj

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 791
Joined: Fri Mar 17, 2006 7:45 pm
Location: Gold Coast QLD

Will a l200 diesel transfer fit a 2.6petrol paj

Post by NCpaj »

As the title says will a l200 diesel transfer fit a 2.6petrol paj,

-is it just bolt on
-are the ratios the same-will it give me lower ratios
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
Posts: 16
Joined: Thu Nov 04, 2004 8:54 am
Location: Ankara

Post by gokhanugur »

l 200 diesel at 2000 rpm will be going about 100km/h. 2.6l petrol pajero turns 3000 rpm for the same speed. so you will end up with some other corrections to do.
88 Superwagon LWB,7 seater, 2.6L 4G54 engine, 5 sp,Manuel Hubs, LSD(fitted later).
Posts: 791
Joined: Fri Mar 17, 2006 7:45 pm
Location: Gold Coast QLD

Post by NCpaj »

thanks for the reply. thanks for the reply its just that a bloke in the 4sale section has and shagged l200 g box and transfer for free in rebank plains, for any one else interested
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

OK, to try to make sure we're all on the same page here...

In Australia, L200 is an old vehicle - pre Triton, 1980s vintage.

In the UK, L200 is a current vehicle - I think it's what Australia calls a Triton today.

I'm guessing the vehicle to which gokhanugur refers is not the same as the one NC Paj is considering.

Cheers,

Scott
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest