Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Any ideas on making some shock hoops ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Any ideas on making some shock hoops ?

Post by CWBYUP »

Just sorting out how i'm going to mate some shock hoops for the front of my Zuk ?

Anyone got any ideas or photos ? I have seen somewhere a photo of some made out 40mm square tube with 1 side cut out of it ?

Anyones opinions would be appreciated.

Cheers Nick
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Ha Ha, this reminds me of some we made for Brenno down here in Tas that were made from old chromed butchers rails bent in a hoop and cut to fit the chassis rail, welded on and Bob's your uncle. I'll see if Brenno has any pics!
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Now thats what i need ! ! !

I was going to buy some from BBM but I would need to mod them any way to fit the zuk so I thought might as well start from scratch.

Thanks Mate
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Best bet is to make them up out of tube, and then mount them on fish plates to weld to the chassis... prevents nasty things like tearing big holes in chassis where it has been weakened around the pipe by the weld... also make sure you use back bracing.


Check out bubs build up in the members section, he has pics of his :)
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

+dj_hansen+ wrote:Check out bubs build up in the members section, he has pics of his :)
Mine are just superior engineering ones which I cut off another car, so I had to make my own braces and not use the ones superior supply.

Image

Image

Image
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests