Outer Limits 4x4 Board

g'day

i have bought myself an ol' cruiza for $150. shes got a 2f, with extractors, 2 and a half inch straight through and a 350 holley. she goes hardcore but the g/box grinds like a bitch and the body got serious cancer.

because the motors in good condish, i was thinkin of putting it in my 84 lux. has anyone done it before, should i need another g/box, please help, all opinions will be considered

cheers, scotty

fibreglass panels and a cheap gearbox champ!!!!!! keep the 40!!

is it a 40 or a 60

i dont think the 2F will fit in there, its a pretty long motor.

The 2F will require chopping the G/ box tunnel out of the floor pan to fit the cruiser g/box and transfer in it. The firewall will need to be cut to allow the engine to protrude into the cabin. you need to cut out the radiator support and make a new one to accomodate a larger radiator. Custom Drive shafts will need to be made not to mention exhaust, wiring and all the other incidentals. I've seen this mod done on a mud racer.
If you are mechanically minded and have some engineering skills then it would take a couple of weeks solid work and a couple of grand. If your gunna pay someone to do it it'll cost around ten grand.

Fix the 40 mate!