G'day all
Ive just installed a new oil pressure gauge and would like to know what psi
the v8' should run at ?
Thanks Stu
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Oil pressure
Moderator: Micka
Rover motors at least the early model ones were high volume low pressure when it came to oil. Do a Google search and you will find heaps of info if they are tired they may have 0-10 psi at idle when hot and 30-40 when running at 2500 rpm. If they are healthy they usually have 15-20psi at idle when hot and 40-50 at 2500 rpm. Cold who knows they may get to 60psi. This applies to the 3.5 & early 3.9s the later 4.0-4.6 have a different oil pump and to my knowledge they have higher pressure as a result.
What oil are you using on the earlier motors it should be 20-50
Hope this helps
What oil are you using on the earlier motors it should be 20-50
Hope this helps
Who is online
Users browsing this forum: No registered users and 5 guests