Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ 40 Stearing

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 18
Joined: Tue Jan 18, 2005 11:38 pm
Location: Darwin NT

FJ 40 Stearing

Post by Short 45 »

Hello all.
Am in the proses of restoring my FJ40 ( converted into a 45 ) and have had a 2in body lift fitted .The question is , does any one have a solution for the stering shaft angel .
The car is @ the panel shop and am contemplating droping th body down to a 1in lift if i have enough clearence between the cab and rear tyres.
Would prefer to leave the 2in lift in.

Any help would be greatly apreciated.

Chris
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

fit 60 series steering setup fixes the angle of the dangle perfectly

i had 2" bodylift in mine before and i just ovaled the hole in the firewall to allow the shaft not to rub on anything

i also fitted a washer under the rear of the steering box to change its angle slightly
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest