Outer Limits 4x4 Board

Hi all,

looking at getting some new torsion bars and springs. It seems there are 2 lengths for the torsion bars.

Can anyone tell me how far the front of the bar goes into the lower suspension arm?

I'm guessing the rear end of the bar is the bit visible at the back. I can't determine how far the t/bar goes in up front without removing it.

Any help much appreciated.

TIA.

I am sure yours would be the shorter ones. The longer ones are for the 3.5/2.8 engines. I know that I need the longer ones for mine 2.8.
Regards Glenn

Thanks for the info, crisis averted.

The owners manual had enough in it for me to work it out, and yes they are the shorter ones.

its fishi wrote:Hi all,

looking at getting some new torsion bars and springs. It seems there are 2 lengths for the torsion bars.

Can anyone tell me how far the front of the bar goes into the lower suspension arm?

I'm guessing the rear end of the bar is the bit visible at the back. I can't determine how far the t/bar goes in up front without removing it.

Any help much appreciated.

TIA.

The short ones are 1307mm
The long ones are 1370mm