Tech Talk for Mitsubishi owners.
Moderator: -Scott-
Posts: 81 Joined: Sun Oct 23, 2005 11:30 am
Location: Sydney
Post
by its fishi Fri Nov 10, 2006 3:04 pm
Hi all,
looking at getting some new torsion bars and springs. It seems there are 2 lengths for the torsion bars.
Can anyone tell me how far the front of the bar goes into the lower suspension arm?
I'm guessing the rear end of the bar is the bit visible at the back. I can't determine how far the t/bar goes in up front without removing it.
Any help much appreciated.
TIA.
[color=blue]blue swb gls 3.0 wanker[/color]
Posts: 104 Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast
Post
by glenn_c Fri Nov 10, 2006 3:24 pm
I am sure yours would be the shorter ones. The longer ones are for the 3.5/2.8 engines. I know that I need the longer ones for mine 2.8.
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Posts: 81 Joined: Sun Oct 23, 2005 11:30 am
Location: Sydney
Post
by its fishi Fri Nov 10, 2006 8:43 pm
Thanks for the info, crisis averted.
The owners manual had enough in it for me to work it out, and yes they are the shorter ones.
[color=blue]blue swb gls 3.0 wanker[/color]
Posts: 305 Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS
Post
by JOHNZ Sat Nov 11, 2006 9:24 pm
its fishi wrote: Hi all,
looking at getting some new torsion bars and springs. It seems there are 2 lengths for the torsion bars.
Can anyone tell me how far the front of the bar goes into the lower suspension arm?
I'm guessing the rear end of the bar is the bit visible at the back. I can't determine how far the t/bar goes in up front without removing it.
Any help much appreciated.
TIA.
The short ones are 1307mm
The long ones are 1370mm
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
Users browsing this forum: No registered users and 25 guests
