Page 1 of 1
re-align or balance of rear tail shaft
Posted: Sat Nov 18, 2006 1:50 pm
by 4x4Monkey
the dam slip yoke slipped out when i replaced the uni joints and now theres a vibration at around 100km,,,,,,,, reason why i did not mark it befor hand was that i had no intention of removing the slip yoke......
ive tried to re align it and iam sick of doing it after 6 bloody goes
who in brisbane can help me
Posted: Sat Nov 18, 2006 5:30 pm
by 4x4Monkey
come on i need some bloody help
Posted: Sun Nov 19, 2006 12:44 am
by WRXZook
A Little theory...
http://www.roddingroundtable.com/tech/a ... eline.html
If you look at the picture, you will see that the yokes must line up exactly to minimise vibration.
Posted: Sun Nov 19, 2006 6:43 am
by jessie928
its not the slip yoke you need to align, its the universal joints.
check that the uni's are paralell and you shoudl be fine
Jes
Posted: Sun Nov 19, 2006 8:26 am
by 4x4Monkey
itsa a balance issue
if the slip yokes at either ent are align the uni's will be too
and they are
Posted: Mon Nov 20, 2006 12:48 pm
by Busiboy
4x4Monkey wrote:itsa a balance issue
if the slip yokes at either ent are align the uni's will be too
and they are
huh?
You will need to post pics or go see a pro for help
Posted: Mon Nov 20, 2006 5:02 pm
by 4x4Monkey
Posted: Mon Nov 20, 2006 6:11 pm
by bastard
Petron automotive slacks creek.