Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

re-align or balance of rear tail shaft

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 338
Joined: Tue Dec 27, 2005 7:20 pm
Location: QLD Ipswich

re-align or balance of rear tail shaft

Post by 4x4Monkey »

the dam slip yoke slipped out when i replaced the uni joints and now theres a vibration at around 100km,,,,,,,, reason why i did not mark it befor hand was that i had no intention of removing the slip yoke......
ive tried to re align it and iam sick of doing it after 6 bloody goes

who in brisbane can help me
Dont worrys There's No Sugar

My 4x4 Is too clean.... Needs a Mud Pack
Posts: 338
Joined: Tue Dec 27, 2005 7:20 pm
Location: QLD Ipswich

Post by 4x4Monkey »

come on i need some bloody help
Dont worrys There's No Sugar

My 4x4 Is too clean.... Needs a Mud Pack
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

A Little theory...
http://www.roddingroundtable.com/tech/a ... eline.html

If you look at the picture, you will see that the yokes must line up exactly to minimise vibration.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

its not the slip yoke you need to align, its the universal joints.
check that the uni's are paralell and you shoudl be fine

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 338
Joined: Tue Dec 27, 2005 7:20 pm
Location: QLD Ipswich

Post by 4x4Monkey »

itsa a balance issue

if the slip yokes at either ent are align the uni's will be too
and they are
Dont worrys There's No Sugar

My 4x4 Is too clean.... Needs a Mud Pack
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

4x4Monkey wrote:itsa a balance issue

if the slip yokes at either ent are align the uni's will be too
and they are
huh?

You will need to post pics or go see a pro for help
Something witty said by someone famous
Posts: 338
Joined: Tue Dec 27, 2005 7:20 pm
Location: QLD Ipswich

Post by 4x4Monkey »

i'll do one better
heres a movie of it lol
http://www.yourfilehost.com/media.php?c ... cs_175.MOV
Dont worrys There's No Sugar

My 4x4 Is too clean.... Needs a Mud Pack
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

Petron automotive slacks creek.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest