Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HJ60 auto to 1HZ powered ute

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 83
Joined: Wed May 14, 2003 8:48 pm
Location: Northern Territory

HJ60 auto to 1HZ powered ute

Post by brumby runner »

Will the auto out of an HJ60 bolt up to a 1HZ?
And has anyone done it?
Are the transfer case output shafts in the same place?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

You could buy a bell from a 100 series 1hz/auto and then it will bolt up, but you will also need the flex plate to suit.
Physically the auto is 60mm longer than a manual.
Andrew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests