Has anyone out there fitted a intercooler to a 75 series ute with turbo 1HZ donk.
75 series don't have much room up front for an air to air and not much room under bonnet either.
I am leaning towards air/water type as its a compact design under bonnet and they have smaller radiator.
I have heard of folks fitting the radiator under the tray back with an electric fan, how eficient would this be.
Have heard good & bad reports for these PWR barrel air/intercoolers.(that is all the denco kit is, they make out as if they manufacture it but the barrel and radiator is an off the shelf PWR part)
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HZJ75 ute intercooler
Moderators: toaddog, Elmo, DUDELUX
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville
Contact:
i mounted my intercooler where the radiator was and then mounted my rad off the cooler and put a shorter viscous hub of a 60 series 2h. the cooler is about 400x700 and about 55mm thick. Another mate fitted a smaller cooler off a skyline in between the rad and grille no dramas, he just had to do some cutting to fit the plumbing.
Who is online
Users browsing this forum: No registered users and 4 guests