Outer Limits 4x4 Board

Has anyone out there fitted a intercooler to a 75 series ute with turbo 1HZ donk.
75 series don't have much room up front for an air to air and not much room under bonnet either.
I am leaning towards air/water type as its a compact design under bonnet and they have smaller radiator.
I have heard of folks fitting the radiator under the tray back with an electric fan, how eficient would this be.
Have heard good & bad reports for these PWR barrel air/intercoolers.(that is all the denco kit is, they make out as if they manufacture it but the barrel and radiator is an off the shelf PWR part)

well if ya not happy with them go a subaru or genuine toyota water to air intercooler

I know Cooma Diesel (Canberra) make an air to air front mount for the HDJ79.

It comes with a new grille which places the centre section further forward a couple of inches.

i mounted my intercooler where the radiator was and then mounted my rad off the cooler and put a shorter viscous hub of a 60 series 2h. the cooler is about 400x700 and about 55mm thick. Another mate fitted a smaller cooler off a skyline in between the rad and grille no dramas, he just had to do some cutting to fit the plumbing.

can prob do some pics if you want but it's not to hard to do.

Pics would be great thanks

Mark