Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60s disc brake rear

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 15
Joined: Fri Sep 01, 2006 9:31 pm
Location: NSW

60s disc brake rear

Post by monstazook »

is there any disc brake set up that will bolt on to a 60s rear
with not to many problems ?
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

if you can get some one to make up the brackets to hold the caliper is not that hard on a 40 which is pretty similar

the only drama with the 60 would be the hand brake
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=23523


Subaru L series front calipers had a hand brake mechanism with the lever pulling inwards... hint hint.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 15
Joined: Fri Sep 01, 2006 9:31 pm
Location: NSW

Post by monstazook »

thanks guys ill look into that
Top
Posts: 52
Joined: Thu Mar 23, 2006 2:22 pm
Location: Ebenezer

Post by Bumpy45 »

I am sure that this topic, or similar, has been covered in great depth. Do a search. If I remember rightly there were issues with master cylinder pressures, and the ratio that the rear and front calipres apply the pressure.
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Bumpy45 wrote:I am sure that this topic, or similar, has been covered in great depth. Do a search. If I remember rightly there were issues with master cylinder pressures, and the ratio that the rear and front calipres apply the pressure.

the thread above needed to modded to wrk not sure if you did or not but here it is http://www.outerlimits4x4.com/viewtopic.php?t=23523



Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 17 guests