Page 1 of 1
60s disc brake rear
Posted: Tue Nov 21, 2006 8:07 pm
by monstazook
is there any disc brake set up that will bolt on to a 60s rear
with not to many problems ?
Posted: Tue Nov 21, 2006 9:32 pm
by STIKA
if you can get some one to make up the brackets to hold the caliper is not that hard on a 40 which is pretty similar
the only drama with the 60 would be the hand brake
Posted: Wed Nov 22, 2006 7:40 am
by Ruffy
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=23523
Subaru L series front calipers had a hand brake mechanism with the lever pulling inwards... hint hint.
Posted: Sat Nov 25, 2006 7:53 pm
by monstazook
thanks guys ill look into that
Posted: Mon Nov 27, 2006 1:42 pm
by Bumpy45
I am sure that this topic, or similar, has been covered in great depth. Do a search. If I remember rightly there were issues with master cylinder pressures, and the ratio that the rear and front calipres apply the pressure.
Posted: Mon Nov 27, 2006 4:01 pm
by A1
Bumpy45 wrote:I am sure that this topic, or similar, has been covered in great depth. Do a search. If I remember rightly there were issues with master cylinder pressures, and the ratio that the rear and front calipres apply the pressure.
the thread above needed to modded to wrk not sure if you did or not but here it is
http://www.outerlimits4x4.com/viewtopic.php?t=23523
Dan