Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fairy overdrive
Moderators: toaddog, Elmo, DUDELUX
Fairy overdrive
I have a mate who has a 60 series diesel , he is looking at getting rid of it , can anyone tell me how much the over drive is worth,
Questions:
Would it fit a 40 series with the handbrake on the drive shaft?
Does it reduce the strength of the driveline?
How hard would it be to install?
What % overdrive does it give?
I have a mate with a V8 40 series that doesn't need to be revving up at 2500rpm on the highway. He looked at the 5 speed option but it was way too expensive due to the chassis crossmember being in the way, or having to move the handbrake.
The main motivation would be fuel economy so I guess its not worth spending huge dollars to save a couple of bucks every highway trip but if we can get confirmation that it will all work, I could have a buyer.
Would it fit a 40 series with the handbrake on the drive shaft?
Does it reduce the strength of the driveline?
How hard would it be to install?
What % overdrive does it give?
I have a mate with a V8 40 series that doesn't need to be revving up at 2500rpm on the highway. He looked at the 5 speed option but it was way too expensive due to the chassis crossmember being in the way, or having to move the handbrake.
The main motivation would be fuel economy so I guess its not worth spending huge dollars to save a couple of bucks every highway trip but if we can get confirmation that it will all work, I could have a buyer.
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
The 40's came out with a 5 speed later in life....the fairey has a higher overdrive ratio than the 5 speed (.78 compared to.85 for the 5th gear...yes you can run the handbrake on them....parts for the fairey are non existant but if it is in good nick, it would be alot easier than a 5 speed conversion as all shafts stay as is.
Who is online
Users browsing this forum: No registered users and 121 guests