I am currently planning to put a small block Chev into the LN65 Lux. I have done a bit of a ring around from the Vic Roads list but it is hard to get these guys to return calls, and most either are to busy to talk, don't want to touch 4WD's or will not approve more than a V6 Commadore conversion.
Currently only found one that will consider a 5L V8 but he doesn't want any more work.
Can anyone recommend a Vic. engineer that would be willing to at least talk about a GenIII LS1 into the Lux? Next best case will be a 305/307.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Chev into Hilux - Vic Engineer Required
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Chev into Hilux - Vic Engineer Required
Need a bigger shed...
Re: Chev into Hilux - Vic Engineer Required
theres a few threads recently on this stuff, also speak with people like Sandy Bowman at aus4wd, or cheezepuff at cheezyracing.. they are both into modding rigs, they may know someone.
you will find it harder now to get someone to approve stuff.
you will find it harder now to get someone to approve stuff.
Who is online
Users browsing this forum: No registered users and 3 guests