Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series CV joints-IFS

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 87
Joined: Tue Feb 15, 2005 3:22 am
Location: WA

100 series CV joints-IFS

Post by fisho64 »

Driver side outer CV joint on my HDJ100 has self-destructed, Repco and SC dont list a replacement for it, cant contact Toyota as it is the weekend.
Any advice on where (if any) besides Toyota they can be sourced from, how much approx and how much hassle to swap it would be appreciated!
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: 100 series CV joints-IFS

Post by Shadow »

fisho64 wrote:Driver side outer CV joint on my HDJ100 has self-destructed, Repco and SC dont list a replacement for it, cant contact Toyota as it is the weekend.
Any advice on where (if any) besides Toyota they can be sourced from, how much approx and how much hassle to swap it would be appreciated!
yellow pages

cv joints

6+ companies, all will carry or will be able to get it in 24hours.
Top
Posts: 87
Joined: Tue Feb 15, 2005 3:22 am
Location: WA

Post by fisho64 »

thanks but as mentioned it is the weekend as I was hoping to get some info before monday
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

well i dont know the price exactly but i was quoted $130 ea for cv's for a 60 series.

id suggest they would be a bit dearer so probably closer to 160 ea.

These are the cheaper ones made in china etc. You can get the aus made ones but they are closer to 270 ea.
Top
Posts: 87
Joined: Tue Feb 15, 2005 3:22 am
Location: WA

Post by fisho64 »

thanks for that, was that the CV and shafts or just the CV?
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

fisho64 wrote:thanks for that, was that the CV and shafts or just the CV?
CV and outer shaft is one piece, inner shaft is generally not sold with the cv's.\ and is not included in the prices i listed.
Top
Posts: 87
Joined: Tue Feb 15, 2005 3:22 am
Location: WA

Post by fisho64 »

Just had mine up on the jack with wheel off, feels like the middle shaft is snapped at the outer joint.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

shit you have IFS, have never had a look at the 100 series IFS setup so cant help you sorry.

Id imagine the cv's would be dearer than i estimated aswell, i was thinking beam axle, not IFS.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Best of luck, i think they are toyota only and expensive...suggest you start at the wreckers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest