Page 1 of 1
80 diffs into 100
Posted: Wed Dec 06, 2006 5:54 pm
by jimbo jones
I have a 80 with air lockers and in about 2-3 years (yes I know I'm thinking a head) I am going to upgrade to a 100 but I want to keep my diffs in the 80 and put them in the 100 will the complet diff bolt strait in?
the main reson I'm thinking of doing this is cos I dont want to buy new lockers & I like the 6 stud patten better than the 5 stud on the 100 has any one done this ?
cheers jimbo
Posted: Wed Dec 06, 2006 6:10 pm
by 80UTE
Diffs will bolt straight in, if buying GXL 100 most have ABS so that will be different, all solid axle 100 had 4.3:1 diff ratio's 80 are 4.1:1. Just a few things to ponder
Wally
Posted: Wed Dec 06, 2006 7:58 pm
by jimbo jones
80UTE wrote:Diffs will bolt straight in, if buying GXL 100 most have ABS so that will be different, all solid axle 100 had 4.3:1 diff ratio's 80 are 4.1:1. Just a few things to ponder
Wally
thanks wally thats what I wanted to here and I can the abs be adapted to the 80 diffs?
jimbo
Posted: Wed Dec 06, 2006 9:01 pm
by 80UTE
Some 80's had ABS too.
Wallt
Posted: Thu Dec 07, 2006 5:46 pm
by jimbo jones
dose the abs of the 100 diffs fit on the non abs 80 diffs or will I have to get abs 80 diffs to put in the100?
Posted: Thu Dec 07, 2006 6:17 pm
by dow50r
Jimbo...its all -diff- erent.....100 non abs was a std, 80 abs was a gxl or better, the c'v is where it is different....