quick 80 series wiring question
Posted: Tue Dec 12, 2006 8:51 am
Does anyone know what the following color wires do that go into the distributor on a 3FE
Light Green with white stripe NE (RPM's)
Light green with red stripe G1 (Crankshaft position)
light green with black stripe G- (??????)
the crappy Haynes manual doesnt even have them in it.
They come out of the Engine ECU but I cant work out what G- means?
Do you measure cranshaft position to adjust the timing?
Can you take NE and plug it into the tacho pin on the new distributor (remember it is a 350 chev) which will run it through the ECU to the tacho or do I have to run the tacho wire straight to the distributor and bypass the ECU?
Light Green with white stripe NE (RPM's)
Light green with red stripe G1 (Crankshaft position)
light green with black stripe G- (??????)
the crappy Haynes manual doesnt even have them in it.
They come out of the Engine ECU but I cant work out what G- means?
Do you measure cranshaft position to adjust the timing?
Can you take NE and plug it into the tacho pin on the new distributor (remember it is a 350 chev) which will run it through the ECU to the tacho or do I have to run the tacho wire straight to the distributor and bypass the ECU?