Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How to identify ignition wire?

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 77
Joined: Fri Aug 05, 2005 1:26 am
Location: N.S.W

How to identify ignition wire?

Post by Seafarer »

Hi All,

I am trying to wire up a dual battery system on the GU Patrol and was wondering if someone can point me towards identifying where is the ignition wire for wiring up to the isolator.
Cheers,
Mike
~1999 GU TD42T~
Top
Posts: 70
Joined: Sun Oct 22, 2006 8:09 pm

Post by eggman »

poke around with a test light until you find one
Top
Posts: 1301
Joined: Mon Aug 07, 2006 9:13 am
Location: bogged in a bloddy hole again.

Post by to_easy »

"dont quote me on this" but doesnt the ignition wire go to the starter motor
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

an ignition wire should be anone that is live only after the ignition is on, for eg, most stereos will have a main always live wire and will have a switching wire from the ignition to switch it on when the ignition is on, while the main power supply is still coming from the higher amp always on wire that is from the battery through a fuse for eg.

find a wire from the ignition loom that become live when the ignition is on, but is dead wien ignition is off then scotch lock it
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 7 guests