Page 1 of 1
CT20 Turbo Rebuild in Bris?
Posted: Fri Dec 15, 2006 5:22 pm
by RUFF
Anyone had a CT20 Turbo Rebuilt in Brisbane? Where and How much? Did you remove the turbo or did they do the entire job? Ive got one pumping oil into the intake.
Posted: Fri Dec 15, 2006 8:20 pm
by bastard
My ct 20 was rebuilt by mike vine 6 monthsb ago and it cost 650.
Posted: Fri Dec 15, 2006 8:43 pm
by high n mighty
Have you checked both side of the intake side Tony??
Could be blow-by from the engine if it is on both sides
Posted: Fri Dec 15, 2006 8:43 pm
by RUFF
Richard was that on or off the car? How much work did it need, just seals or machine work as well?
Posted: Fri Dec 15, 2006 8:44 pm
by RUFF
high n mighty wrote:Have you checked both side of the intake side Tony??
Could be blow-by from the engine if it is on both sides
Its not blow by. The Rocker Cover breather is not connected to the intake.
Posted: Fri Dec 15, 2006 9:02 pm
by high n mighty
RUFF wrote:high n mighty wrote:Have you checked both side of the intake side Tony??
Could be blow-by from the engine if it is on both sides
Its not blow by. The Rocker Cover breather is not connected to the intake.
No problem. The only reason I was happy buying my turbo was because it had a mist of oil on both side of induction. I beleive the old engine had blow-by.
Posted: Sat Dec 16, 2006 7:53 am
by Yumsylux
You'd probably find with a the L series motors that there'll be a little bit of blow by right from day one. Apparetly it's always been like that. Only a little bit though.
Posted: Sat Dec 16, 2006 7:55 am
by bastard
I dropped it off at mike vines for that price,but i ended up bying all my crossover pipes from mtq turbo at salsbury,and they told me that mike vine drops his turbos of there to have something done that he cant do,by memory they were 100 cheaper than mike vine.
Posted: Sat Dec 16, 2006 11:38 am
by dar_sbb
my seals are also gone... on a 15min drive, 3/4 of my oil was pumped through the intake. i was lucky i didnt get stopped by the police
Posted: Sat Dec 16, 2006 1:09 pm
by Shadow
Yumsylux wrote:You'd probably find with a the L series motors that there'll be a little bit of blow by right from day one. Apparetly it's always been like that. Only a little bit though.
pretty much every internal combustion engine will have a little bit of blow by from day 1.